STANDARD LENGTHS
| Solids | ½” to 9″ OD |
| Tubes | 11⁄8″ to 9″ OD |
| Rectangles | Up to 15” |
| Standard Lengths | 144″ |
| Shape/Form | semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar |
TYPICAL USES
| Builders Hardware | brackets |
| Electrical | switches, electrical components |
| Fasteners | screw down nuts |
| Industrial | bushings, high strength machine parts, hooks, frames, struts, gears, bridge pins, propellers, hydraulic cylinder parts, large valve stems, slow speed, heavy load bearings, gib, cams, hydraulic cylinder parts, forming dies for wood pulp industry, wear rings for forming dies for wood pulp industry |
| Marine | marine hardware, clamps, covers for marine hardware, boat parts, rudders |
SIMILAR OR EQUIVALENT SPECIFICATION
| CDA | ASTM | SAE | FEDERAL | INGOT | MILITARY | OTHER |
| C86300 | ASTM B505 ASTM B22 |
SAE 430 B SAE J461 SAE J462 |
QQ-C-390B TYPE III | 424 | MIL-C-22229 COMP 8 | High Stgrength Yellow Brass |
MACHINABILITY
| Alloy | Machinability Rating | Density (lb/cu in.) |
| C86300 | 8 | 0.283 |
C86300 Manganese Bronze Alloy is a high strength, non-heat treatable copper alloy intended for use in applications requiring a good combination of outstanding wear characteristics and high bearing strength for heavy loads and slow speeds. Typical applications include slow speed heavy duty load bearings, gears, cams and hydraulic cylinder parts.
